The Price Displayed On The Product Does Not Include Tax And Shipping. The Shipping Cost Shown On The Page Is Not The Final Shipping Cost. Please Consult Customer Service For Shipping Costs Or Tax Rates Before Placing An Order.
115XT Active Diva of The Stage 2-Way Active, 15"
Bandwidth 55 Hz- 20 KHz
Transducers LF : 1 x 15"
HF : 1 x 3"
Weight 21 kg / 46 lb
Directivity H: 60°
V: 40°
标题
Electroacoustic specs
Power Factor Correction (PFC): Universal operation
worldwide, error-proof connection to mains voltage
(tolerance up to 400VAC)
·Smart Rail Management (SRM): Reduce heat consumption and
improve efficiency
·High performance/low power consumption universal power
supply
·Fixed frequency switching mode output stage for maximum
fidelity
·Optional DSP board and heat sink board
·Comprehensive intelligent protection: overheating (power
limiting - overheating shutdown) short
circuit/overload/clipping limiter/high
frequency protection
·Temperature controlled internal fan and output
·1 input and 2 outputs 24bit@48kHz DSP (optional
configuration: 2 inputs and 2 outputs)
·Input EQ: 5 parametric EQs: Peak, High/Low Shelf, All
Pass, Band Pass, Band Stop, High/Low Pass
· Output equalizer: Parametric IIR filters: Peak, High/Low
Shelf, All Pass, Band Pass, Band Stop, High/Low Pass
·Crossover filters: Butterworth, Linkwitz-Riley, Bessel,
6dB/oct to 48dB/oct
·Limiters: Peak limiter, RMS limiter, frequency offset
limiter, clipping limiter, temperature limiter
·Delay: 340 ms input delay (1in), 10 ms output delay per
channel
Maximum output power (EIAJ test standard): 2*1000W/8Ω,
2*1500W/4Ω; bridged 3000W/8Ω
·Working voltage: AC 100-240V±10%, 50-60Hz
·Gain: 32dB
·Input sensitivity: 2.2V/+9dBu
·Frequency response: 20Hz-20kHz (±0.5dB)@1W, 8Ω
·Signal-to-noise ratio: >115dB (20Hz-20kHz, A weighted)
·Crosstalk isolation: -71dB@1kHz
·THD+N:<
0.09% from 0.1W to half power (typically <0.05%)
·DIM100: < 0.09% from 0.1W to half power (typically
<0.07%)
·Input impedance: 10kΩ balanced
·Conversion rate: 50V/μs@8Ω, input filter bypassed
·Damping coefficient: >500@100Hz
Physical specs
2-way active coaxial enclosure
amplified by LA4X / LA12X
Usable bandwidth (-10 dB) 55 Hz – 20 kHz ([X15])
Maximum SPL1 138 dB ([HQ15])
Nominal directivity (-6 dB) Vertical: 60° symmetric
horizontal: 40° symmetric
Monitor angle Without risers: 35°
with risers: 55°
Transducers LF: 1 × 15″ cone driver
HF: 1 × 3″ diaphragm compression driver, neodymium
Acoustical load Load bass-reflex, L-Vents, ellipsoidal
waveguide
Nominal impedance LF: 8 Ω
HF: 8 Ω